How to price a menu item: from food cost to the price on the menu
How to price a menu item: plate cost, target food cost, VAT, rounding and a check against nearby prices, with a worked example and what a loyalty reward costs.

Pricing a menu is a chain of small decisions: what a plate costs you, what share of the price you want to spend on ingredients, what neighbours charge and what the dish is worth to guests. This guide covers the main methods, one full worked example, how to show prices on the menu, when to raise them and where regulars fit.
The short answer
Start with the maths, then let the market overrule it. Price = plate cost ÷ target food cost percentage, calculated on the price without VAT, then add VAT. That gives you a floor. Round to a menu friendly price, compare it with neighbours, and judge each dish by the euros it leaves per plate, not only by its percentage.
What are the main ways to price a menu item?
Four methods are in common use, and good pricing usually mixes them.
1. The food cost percentage method
You pick a target share of the selling price that you want to spend on ingredients, and divide the plate cost by it. An illustration, with round numbers: a plate that costs €3 in ingredients with a 30% target comes to €3 ÷ 0.30 = €10 before VAT. It is quick, applies the same rule to every dish and shows you when a supplier price change needs a new menu price. How to get the plate cost itself, with yield and trimming, is in Food cost percentage: how to calculate it for every dish and your whole menu.
Its weakness, again with round numbers: at 30%, a €2 plate sells for about €6.67 and a €6 plate for €20. The method applies the same percentage to both, so the cheap dish leaves few euros.
2. Contribution margin per dish
Contribution margin is the selling price without VAT minus the plate cost. It is the money each plate leaves to pay for staff, rent, energy and your own pay. Two dishes with the same percentage can leave very different amounts, and the amount is what pays the bills. Use the percentage to set a price, and the margin to decide which dishes deserve a place on the menu and on the first page.
3. What nearby places charge
Your guests compare you with the café across the street, not with a spreadsheet. Note the price of the same kind of dish at three to five places guests would otherwise choose, in similar portions and with similar quality. This is your ceiling for a standard dish. If your formula gives a price well above it, the problem is usually the plate cost, not the market.
4. Perceived value
Some dishes are worth more to a guest than their ingredients suggest: a house speciality, a larger portion, a locally sourced ingredient, a plate that is nicely served. A higher price is easier to defend when guests can see or taste why. Perceived value lets you charge above the formula for a few signature dishes, and it is also the reason a plain dish should not be priced above neighbours without something the guest notices.
How do you choose a target food cost percentage?
There is no single right number, and we will not give you one. A target copied from a blog may not fit your costs. A better route:
- Calculate your actual food cost for the last month from stock and purchases, as in the food cost guide.
- Decide how much of each sales euro must remain after ingredients to cover everything else, using your rent, wages and other fixed costs.
- Set a range for the whole menu, not one number. Set one range from your own costs and let some dishes sit above it and others below.
Set food and drinks targets separately, so one side cannot hide the other.
How do you price a dish, step by step?
An illustration, with round numbers. The VAT rate below is only for the example, use the rate that applies to you.
The dish: a pasta with seasonal vegetables, in a small restaurant.
- Plate cost. Ingredients for one portion add up to €3.20, after yield and trimming.
- Target. The owner aims for about 30% food cost on this dish.
- Raw price without VAT. €3.20 ÷ 0.30 = €10.67.
- Add VAT. With 10% VAT for the example, €10.67 × 1.10 = €11.74.
- Round to a menu friendly price. €11.90 sits just above the raw price, so the target still holds. At €11.90 the price without VAT is €10.82, food cost is 3.20 ÷ 10.82 = 29.6% and the contribution margin is €10.82 minus €3.20 = €7.62.
- Check against neighbours. Three nearby places charge €11.50, €12.50 and €13.00 for a similar pasta. €11.90 sits inside that range, so it fits the local market.
Rounding down to €11.50 would still look natural. It would push food cost up to 30.6% and take about 37 cents off the margin per plate, so round up when the neighbours allow it.
When the percentage and the margin disagree
Take a second dish from the same menu, again an illustration with round numbers: a burger with a plate cost of €4.80. At a 30% target the formula says €16.00 without VAT, €17.60 on the menu. Neighbours charge €14.00 to €16.00, so €17.60 is too high. The owner prices it at €15.90 on the menu, €14.45 without VAT. Food cost is 33.2%, above the target, but the burger leaves €9.65 per plate against €7.62 for the pasta.
That is the point of the second method: the burger misses the percentage and still earns more per plate. Each burger sold leaves more toward your fixed costs than a pasta. If you want to go further, the menu engineering matrix sorts every dish by how often it sells and how much it earns.
How should prices look on the menu?
A few habits cost nothing and are easy to test on your own guests.
- Pick one ending and use it everywhere. €11.90, €11.50 or a round €12 all work. What looks careless is a mix of €11.90, €12 and €12.45 on one page.
- Keep the price quiet. You can align prices in a column next to the dish name, with a small currency sign or none. That keeps the focus on the dish, where a row of dots or a bold price puts it on the number.
- Describe before you price. One line on what is in the dish, where it comes from or how it is cooked gives the price a reason.
We cannot point to a study that proves one ending always sells more, so treat these as things to try: change one section for a month and watch what guests order, using your till reports.
If you need a clean layout for the result, the free restaurant menu maker lets you type your dishes and prices, pick a look and a colour, and download a print ready A4 menu.
When and how do you raise prices?
Raise prices when your plate costs rise. Recalculate the dishes whose ingredients got dearer, and change those first. Raise the dishes affected by a small step rather than everything at once. Update the menu in one go, so you do not reprint it five times, and keep one or two familiar dishes at a stable price. Watch the sales of the dishes you changed for a few weeks after, since the till shows quickly if a price crossed a line for your guests. If sales overall look weak after a change, check whether you lost customers or whether they come less often with Sales are down: did you lose customers, or do they come less often?.
Where do regulars fit into your prices?
Keep menu prices fair for everyone and thank loyal guests with a reward, not a lower price on the menu.
A reward costs you less than it looks. An illustration, with round numbers: a coffee sells at €3.20 on the menu, and its product cost (beans, milk, cup) is €0.45. When a regular claims it as a free reward after a number of stamps, you give up that €0.45 of ingredients, not the €3.20 price. How many stamps on a loyalty card: a simple calculation shows how to turn that into a number of stamps, and Loyalty reward ideas: what to give, what it costs and what it is worth lists rewards that are cheap for you and valued by guests.
Your plate costs from this guide are what you need for that calculation. The loyalty ROI calculator asks for the reward's menu price and your product cost share, which is your food cost percentage from this guide.
A Rewardly digital loyalty card for a restaurant or a café lives in Apple Wallet and Google Wallet. Setup takes about 2 minutes and a guest adds the card in about 10 seconds.
For lunch guests in particular, see Lunch menu: how to keep your regular lunch guests. For the bigger picture of what brings guests back, see How to increase restaurant sales without spending more on advertising.
FAQ
What if my plate cost is too high to reach my target?
Change the plate before the price: a smaller portion, a cheaper ingredient with the same effect or a better supplier price. If you cannot, accept a lower margin on that dish, as with the burger, and let other dishes carry the menu.
How do I price a coffee or another drink?
Use the same method with its own target. An illustration, with round numbers: a latte costs €0.65 in beans, milk and cup, and the café aims for 20%. €0.65 ÷ 0.20 = €3.25 without VAT, €3.58 with 10% VAT for the example, rounded to €3.60 on the menu. Check it against the cafés around you, as with the pasta.
Can Rewardly set my menu prices?
No. Rewardly runs your loyalty card, not your pricing. The menu maker takes the dishes and prices you type and lays them out as a menu, so the numbers still come from your own plate costs.
Know your plate costs? Put a reward on top. Try Rewardly for €0
No upfront payment, cancel anytime.


